Zinsser Watertite Waterproofing Paint - 5 L

Watertite waterproofing paint is guaranteed to keep water out and contains a biocide that protects the dried coating against fungal degradation for a minimum of 5 years. It can easily be applied to wet or dry surfaces creating a smooth, non-gritty finish.

Watertite waterproofing paint has a unique solvent based formula that combines a state-of-the-art waterproofing resin with portland cement to create a coating that stops up to 34 psi of water pressure.

It also contains a biocide that protects the dried coating against fungal degradation for a minimum of five years after application, making it great for surfaces where fungal degradation can be problematic.

Unlike other waterproofers, Watertite waterproofing paint can be applied to dry, damp or wet surfaces, so water problems can be cured immediately. It can be recoated in just four hours and dries to a smooth, bright white, non-yellowing finish that resists dirt and dust pick-up.

Watertite waterproofing paint can be tinted to most off-white or pastel colours and has an ultra low odour formula. It adheres to any interior or exterior masonry surface, above and below grade and is formulated to prevent recurring efflorescence on concrete and brickwork.

• Brush
• Roller

• Coverage: 2 m² per L
• Touch Dry: 1 Hour
• Full Cure: 7 to 14 Days
• Recoatable: 4 Hours

• Capacity: 5 L
• Colour: White

Note: Tinting - maximum 30 ml / 5 L (tints easily to beige, blue and grey).