ROCKWOOL TCB Cavity Fire Barrier - 160 mm x 1200 mm

Cavity barriers work to improve a building’s safety by preventing the spread of fire within concealed voids. By specifying and installing the tcb cavity barrier or pwcb cavity barrier, they provide essential protection whilst also helping to minimise air leakage and heat loss between the external cavity and the separating party wall.

ROCKWOOL tcb cavity barrier and pwcb cavity barrier products have been created to provide excellent levels of fire protection for timber frame and masonry properties. They have been designed to meet the minimum building regulation requirements for fire resistance in concealed wall cavities, having been tested and assessed for up to 60 minutes’ integrity and insulation, thereby exceeding minimum requirements.

These cavity wall insulation products have been created from non-combustible stone wool and wrapped within a resilient polythene sleeve which acts to provide weather protection during installation. The sleeves are also colour-coded to differentiate between the two products, the tcb’s are red and the pwcb’s are white. An all in one solution, the ROCKWOOL pwcb cavity barrier also achieves the trilogy of requirements for fire safety, acoustic flanking and thermal bypass in one single product whilst providing effective perimeter edge sealing, reducing the leaking of air and associated heat loss.

• A vertical or horizontal solution – ROCKWOOL cavity barriers can be used in both vertical and horizontal applications. In vertical applications, both flanges of the cavity barrier can be fixed to the inner leaf at 150 mm centres, using staples or clout nails prior to compression fitting by outer cavity wall. In horizontal applications, only the top flange of the polythene sleeve should be fixed

• Thickness: 160 mm
• Width: 160 mm
• Length: 1200 mm